Mold Inspection

By | February 3, 2014

How to Do It the Right Way

Mold inspection can spell the difference between small mold growth and major mold damage. If you suspect that there is mold growth in your house, a proper inspection will help you know for sure so you will know what to do about it. If you don’t do a thorough inspection, your mold problem can easily get out of hand.

The first step in searching for any mold in the house is to do a visual inspection of the different surfaces in various rooms in your house. Mold is not that difficult to detect if you know what they look like, especially since the most dangerous ones are either black, gray, green, or brown in color. Unfortunately, some forms of mold are also colorless, so the only way to really identify mold is to do a mold inspection.

How to Inspect Your House for Mold

Basically, you have two options when it comes to inspecting your house for mold. You may want to do a visual inspection first. Check out mold photographs online and compare them with what you see in your house. If you do see them, there is no need to conduct further tests unless you want to specify what type of mold they are or you want to check for invisible mold growth.

Get a mold sample and send it to a lab. 

You can collect a mold sample from your house then send it to a laboratory to have it tested. The challenging part in this option is how you can collect a sample without putting your health at risk.


To do so, you will need a plastic bag to hold the sample and a clear tape to take the sample from the surface you chose to test. You may also buy home test kits that provide you with the right type of adhesive material that can effectively collect mold.

Just choose a specific area, put a clear tape, and remove the tape again; mold on the surface will easily stick to the tape. Make sure to wear gloves and a respiratory mask when collecting samples.

Then look for a mold inspection lab and call to arrange for the test to be done. They will tell you how to send the sample to their lab and will contact you with the results. Unfortunately, home testing doesn’t give you the whole story as to where the mold is thriving and what you can do about it.

Hire mold and water damage specialists to do the testing for you. 

There are many professional contractors that offer mold inspection services alongside mold removal and damage repair services. This is definitely the best move since it will give you a professional report on the amount and type of mold present in your home.

They can tell you whether the mold is toxic, allergenic, or harmless, except for its unsightly appearance. Professional contractors have the necessary equipment and know the most extensive techniques such as air testing, swab testing, culture plates, and so on to conduct accurate testing. If the inspection is done by a water damage restoration service, you can also get them to do mold remediation and mold prevention.

Common Errors in Mold Inspection

Many people make a lot of errors when they inspect for mold, resulting in inaccurate tests. Thus, they act based on incorrect information, often resulting to a late removal of these dangerous allergens.

To make sure health and safety in your household do not get compromised, your mold inspection should yield accurate results. This is why experts recommend leaving this job up to professionals.

You should also look for thorough inspection, instead of just testing or sampling. An inspection will pinpoint specific areas where mold grow or can grow, while a test will simple confirm that mold is present but will leave you in the dark as to where you need to conduct mold removal.